Tandem Dual Tilt
Available Lengths:
- 24' - 32' - 40'
- 26' - 34' - 42'
- 28' - 36'
- 30' - 38'
Standard Features
| - 22,400 G.V.W.R. | - 15 Degree Tilt Pitch |
| - 10,000 x 2 G.A.W.R. | - 12VDC Hydraulic Pump |
| - 2 5/16" Gooseneck Ball Coupler (25,000 lb.) | - Scissor Lift |
| - Safety Chains | - 12" x 19 lb. I-Beam Neck |
| - (2) Drop Leg Jack (10,000 lb.) | - 12" x 19 lb. I-Beam Main Frame |
| - (2) Oil Bath Axles (10,000 lb.) | - 8" x 15 lb. I-Beam Deck Frame |
| - Torsion Suspension | - 3" Channel Crossmembers 16" on Center |
| - (8) 16" Grey Dual Wheels w/ 8 on 6.5" Bolt Pattern | - Bridging |
| - (8) 16" 235/80R16 Radial Tires (3,090 lb.) | - 2" Treated Pine Lumber Deck |
| - Spare Tire | - 102" Wide Deck |
| - Rubrail & Stake Pockets | - DOT Approved Flushmount Lights |
| - Electric Breakaway Kit w/ Charger | - Sealed Wire Harness |
| - DOT Reflective Tape | - Sand Blasted |
| - Side Steps on Both Sides | - Acid Washed |
| - Toolbox | - Powder Coated |
| - Self-rising Bumper |
Available Options
| * Denotes Standard | |
| Coupler Options | Color Options |
| - BP 2 5/16" Round (25,000 lb.) * | - Black Powdercoat* |
| - BP 2 5/16" Round (30,000 lb.) | - Grey Powdercoat |
| - GN Load-Leveling 2 5/16" Square (20,000 lb.) | - Red Powdercoat |
| - 3" Pintle Eye - Face-mount (20,000 lb.) | - White Powdercoat |
| - GN 2 5/16" Square (25,000 lb.) | |
| - GN 2 5/16" Square (30,000 lb.) | Other Options |
| - 12"oc Crossmembers | |
| Axle Options | - 1 Pair D-Rings |
| - (2) 10,000# Elec / Torsion * | - Rough Oak Floor |
| - (2) 10,000# Elec / Spring | - Weld-On Strap Ratchets (2) |
| - (2) 10,000# Elec / Hyd Disk / Torsion | - LED Light Package |
| - (2) 12,000# Elec / Spring | - Strap Rachets Slide Track |
| - Steel Floor & 4 D-Rings | |
| Tail Options | - Front Toolbox |
| - 24' Tilt Deck * | - Deck on the Neck |
| - Side-mount Toolbox | |
| - Winch 12VDC (12,000 lb.) | |
| - (2) Two Speed Jacks (12,000 lb.) |