6" Channel Equipment Tilt
Available Lengths:
- 22'
- 24'
Standard Features
| - 14,000 G.V.W.R. | - 11 Degree Tilt Pitch |
| - 7,000 x 2 G.A.W.R. | - 3" x 16" Cylinder |
| - 2 5/16" Adjustable Ball Coupler | - 6" Channel Tongue |
| - Safety Chains | - 6" Channel Frame |
| - (1) Drop Leg Jack (8,000 lb.) | - 3" Channel Crossmembers 16" on Center |
| - (2) EZ-Lube Axles (7,000 lb.) | - 2" Treated Pine Lumber Deck |
| - Torsion Suspension | - 83" Wide Deck |
| - (4) 16" White Spoke Wheels | - DOT Approved Flushmount Lights |
| - (4) 235/80R16 Radial Tires (3,500 lb.) | - Sealed Wire Harness |
| - Rubrail & Stake Pockets | - Sand Blasted |
| - Electric Breakaway Kit w/ Charger | - Dipped in Primer |
| - 9" x 72" Treadplate Steel Fenders | - Liquid Paint |
Available Options
| * Denotes Standard | |
| Coupler Options | Color Options |
| - BP 2 5/16" Adjustable * | - Black Powdercoat* |
| - GN 2 5/16" Round (30,000 lb.) | - Grey Powdercoat |
| - GN Load-Leveling 2 5/16" Square (25,000 lb.) | - Red Powdercoat |
| - 3" Pintle Eye - Channel-mount (14,000 lb.) | - White Powdercoat |
| - GN 2 5/16" Square (30,000 lb.) | |
| - GN 2 5/16" Round (25,000 lb.) | Other Options |
| - GN 2 5/16" Square (25,000 lb.) | - 1 Pair D-Rings |
| - Rough Oak Floor | |
| Axle Options | - LED Light Package |
| - (2) 7,000# Elec / Torsion * | - Steel Floor & 4 D-Rings |
| - (2) 7,000# Elec / Hyd Disk / Torsion | - Front Toolbox |
| - Deck on the Neck | |
| Tail Options | - Winch 12VDC (12,000 lb.) |
| - 16' Tilt Deck * | - Single 2-Speed Jack (12,000 lb.) |